Baum 22N Cutter
- 8.5″ touch-screen color display
- Bar code reader
- Computer network capability
- Fully programmable microprocessor control
- 1,998 programs (unlimited w/ESPV Compucut)
- False clamp plate
- Eccentric knife leveling
- Non-corrosive stainless steel table
- No slot in table
- Powered back gauge with direct positioning
- Fully hydraulic knife and clamp
- Fraction input w/automatic decimal conversion
- Adjustable clamp pressure
- Lifetime cut counter
- Quiet operation, hydraulic pump runs only during cutting
- Adjustable knife cycle timing
Baum 22N Specs
- Maximum cutting width:
- Back gauge speed on return:
- Knife Speed:
- Clamp pressure min.:
- Clamp pressure max.:
- Electrics:
- 22.05 inches (560 mm)
- 2.76 in/sec (7 cm/sec)
- 20 cycles/min
- 397 lbs. (180 daN)
- 2,646 lbs. (1200 daN)
- 220/1/60 or 220/1/50
